rev.a5 www.gulfsemi.com RDB105S single phase glass passivated fast recovery surface mount bridge rectifier voltage:600v current:1.0a feature dbs for surface mount application reliable low cost construction utilizing molded plastic technique mechanical data terminal: plated leads solderable per mil-std 202e, method 208c case:ul-94 class v-0 recognized flame retardant epoxy polarity: polarity symbol marked on body mounting position: any dimensions in inches and (millimeters) maximum ratings and electrical characteristics (single-phase, half -wave, 60hz, resistive or inductive lo ad rating at 25 c, unless otherwise stated, for capacitive load, derate current by 20%) symbol rdb 105s units maximum recurrent peak reverse voltage vrrm 600 v maximum rms voltage vrms 420 v maximum dc blocking voltage vdc 600 v maximum average forward rectified current at ta =40 c if(av) 1.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load ifsm 30.0 a maximum instantaneous forward voltage at forward current 1.0a vf 1.3 v maximum dc reverse current ta =25 c at rated dc blocking voltage ta =125 c ir 10.0 500.0 m a ma maximum reverse recovery time (note 1) trr 250 ns typical junction capacitance (note 2) cj 25.0 pf operating temperature range tj -55 to +125 c storage and operating junction temperature tstg -55 to +150 c note: 1. reverse recovery condition if = 0.5a, ir =1.0a, irr =0.25a 2. measured at 1.0 mhz and applied voltage of 4.0 volt
1 ratings and characteristic curves RDB105S 1 rev.a5 www.gulfsemi.com
|
